The subframe is a component in a vehicle's chassis that houses the engine and steering components. It is found in unit-body construction methods, which have been used

The Z Cars tubular front subframe is designed to dramatically reduce bump-steer. At 10 kilos lighter than the standard front subframe set-up it represents a 

A subframe is the steel tu that holds the engine, suspension and steering system in place. To find a new subframe for your vehicle, simply enter your registration number in the tool above

A subframe is the steel tu that holds the engine, suspension and steering system in place. To find a new subframe for your vehicle, simply enter your 

Subframe connectors are steel-tube reinforcements that are welded or bolted to the underside of the car. They connect the front and rear subframe rails together. This strengthens the body by "rigidly" connecting the two ends of the car and greatly increases the rigidity of the unibody chassis.

Cost at the Mechanic: $600 to $1,600. Parts: $300 to $600. Labor: $600 to $1,000. Replacing the subframe will generally take four to eight hours in the shop because the engine and transmission typically need to be lifted slightly. At the same time, the brakes and suspension need to be supported to drop the subframe out and replace it.

Place a car jack under each corner of the subframe. Gently raise them, one at a time. If you notice that the subframe is rising, but not the rest of the car, it's a certain sign of shot bushings. Of course, the absolute best way to know is to take your vehicle to a certified mechanic and have them do a full inspection.

The subframe on your car is a structural unit that essentially functions as a mounting point for critical assemblies in your vehicle, like its engine, suspension, and

What does car subframe do? The purpose of using a subframe in an automobile is to distribute high local loads over a wider area of the body structure (most relevant in thin-walled monocoque body designs) and to isolate vibration and harshness from the rest of the body. The subframes are bolted or welded to the vehicle body.

Its exact address is 3355 NE CORNELL RD, HILLSBORO, 97124 5018, OR, Oregon. You will easily find the National rental desk by following the directions in the Hillsboro, Oregon. If you have any questions, then you always have the opportunity to contact the local office via National phone number: 5037531690.

If you've noticed any of these problems, the most likely culprit is a damaged car subframe. But, to be certain, you will have to take your car to a reputable Orange County chassis and subframe swap shop. Luckily, even if your supporting frame shows signs of damage, it's no reason to panic. Keep reading to learn what you can do about it.